Material Safety Data Sheet (MSDS)
Part I Name of the company and material proving
Name of customer: |
------------- |
Product name: |
powder coating |
Special application: |
the application of electrostatic powder spraying into industrial equipment |
Address: |
Dongguan Aiyue Metal Powder Co., Ltd. No.3 Road 4 Chuangye Industrial Park, Daluosha Village, Daojiao Town, Dongguan |
Post code: |
523186 |
Tel: |
+86 769 88385858 |
Fax: |
+86 769 883835856 |
Part II Composition/components information
1. Name of composition: CAS.NO
Resin
Coloring material
Filling
Addition agent
Part III Summary of danger
1. Type of danger: |
non-dangerous chemicals |
2. Invading way: |
inhale, ingestion and skin absorption |
3. Health hazard: |
|
(1) Skin touch: (2) Inhale: (3) Ingestion: |
slight stimulation it may stimulate ingestion is harmful for people. |
4. Environment damage: |
no pollution upon environment; treatment of waste should be implemented according to national or local law. |
5. Burning explosion danger: (1) Flash point: (2) Ignition temperature: (3) LEL: (4) UEL: (5) Common burning explosion danger: |
about 450℃ no data no data no data burning will produced poisonous fume and steam |
Part IV Emergency measure
1. Skin touch: |
use water to wash touch part immediately |
2. Eye touch: |
use water to wash eye immediately and go to a doctor if necessary |
3. Inhale: |
breathe fresh air immediately and go to a doctor if necessary |
4. Ingestion: |
drink enough water for promoting emesis, go to a doctor if necessary |
Part V Operation treatment and storage
1. Carefully weigh and take product according to rules and avoid overflow
2. Wear protective glove and chemical safety protective glasses when touch products
3. Use product under ventilation environment
4. Products must be stored indoors and be kept away from direct sunlight
Part VI Touch control/individual protection
1. Respiratory system protection: |
wear gauze mask and use under ventilation environment |
2. Hand protection: |
wear protective glove |
3. Eye protection: |
wear chemical safety protective glasses |
4. Other protection: |
carry out according to common procedure |
5. Engineering control: |
strengthen environment ventilation |
Part VII Physicochemical properties
|
|
Method |
1. Appearance and shape and properties: |
powder shape without pungent odour |
|
2. Actual density (23°C): |
1.2-1.9 g/cm3 |
( ISO 8130-2/-3) |
3. Expansion density (23°C): |
400-1000 kg/m3 |
|
4. Lower explosion limit of powder and mixing gas: |
20 - 70 g/m3 |
(ISO 8130/4) |
5. Solubility in water: |
not dissolve |
|
6. Softening point: |
>50℃ |
electric furnace |
7. Burning temperature of powder and mixing gas: |
450-600℃ |
VDE0165 |
8. Pressure of water steam: |
no data |
|
9. PH value in water: |
no change in water |
|
10. Flash point: |
about 450℃ |
|
Part VIII Stability and reactivity
1. Stability: |
stable |
2. Prohibition object: |
none |
3. Condition avoiding touch: |
none under common condition |
4. Polymerization danger: |
cannot happen |
5. Decompression product: |
carbon monoxide, carbon dioxide compound and fume |
Part IX Toxicity information
1. Risk character: |
animal test and powder which uses material without toxicity for long time appear as no special risky character |
2. Medical features
(1) Skin allergy may be caused at skin wrinkle part or touch part of straightjacket with skin
(2) Immediately clean if touch product and immediately go to a doctor if necessary
Part X Ecology information
Possible environmental influence:
1. Not dissolve in water when put into water.
2. Biological decomposition cannot be easily made when it is put into soil.
Part XI Waste treatment
1. Waste property: |
no pollution upon environment |
2. Treatment method of waste: |
do not pour water into water tube or drain channel treatment of waste should be implemented according to national or local law |
Part XII Transportation information
1. Package mark: |
none |
2. Risk mark: |
none |
3. Packing method: |
external packing carton with polybag film, net weight 25KG |
4. Notice of transportation: |
avoid direct sunlight and avoid water |
Part XIII Compliance information
1. Classification and labels of dangerous chemical substances commonly used: none
2. National Hazardous Waste Inventory (issued by State Environmental Protection Administration, State Economic and Trade Commission, Ministry of Foreign Economy & Trade and Public Security Ministry on April, 18, 1998)
3. General rules to drafting safety data sheet for chemicals.
Part XIV Transportation information
1. Package mark: |
none |
2. Risk mark: |
none |
3. Packing method: |
external packing carton with polybag film, net weight 25KG |
4. Notice of transportation: |
avoid direct sunlight and avoid water |
Part XV Compliance information
1. Classification and labels of dangerous chemical substances commonly used: none
2. National Hazardous Waste Inventory (issued by State Environmental Protection Administration, State Economic and Trade Commission, Ministry of Foreign Economy & Trade and Public Security Ministry on April, 18, 1998)
3. General rules to drafting safety data sheet for chemicals
Part XVI Other information
Reference document: |
Edited by Zhou Guofeng, Dangerous chemicals safety technology book, Chemical Industry Press. 1997 |
Tabulating time: |
Jul, 25, 2007 |
Tabulated by: |
Dongguan Aiyue Metal Powder Co., Ltd |